FLASH CONDOR GRIFFE G6 PHQ525 MARSHMALLOW 6.0 SPD FLASHTOOL TESTED FIRMWARE فلاش كوندور جميع اللإصدارات

Posted by Rom Flash Media on Saturday, February 18, 2017

CONDOR G6 PHQ525 MARSHMALLOW 6.0 SPD FLASHTOOL

INFO:

Model Name : PHQ525

Model Brand : CONDOR

Model Device: PHQ525

AndrVersion : 6.0

BaseBand CPU: ZSL829_CONDOR

Project Ver : PHQ525_AR_V19.0_20161111

Model Ext : PHQ525

READING INFO:

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin

[Read Ok] : u-boot.bin

[Read Ok] : prodnv.img

[Read Ok] : nvitem_l.bin

[Read Ok] : sharkl_cp1.bin

[Read Ok] : DSP_DM_Gx.bin

[Read Ok] : l__WPH_arm7.bin

[Read Ok] : PM_arm7_sys.bin

[Read Ok] : logo_480x854.bin

[Read Ok] : fblogo_480x854.bin

[Read Ok] : wcn_fdl.bin

[Read Ok] : AA_MARLIN.bin

[Read Ok] : boot.img

[Read Ok] : system.img

[Read Ok] : sysinfo.img

[Build Ok] : cache.img

[Read Ok] : recovery.img

[Build Ok] : userdata.img

AndroidInfo created

Firmware Size : 2828 MiB

Saved to : C:\Users\RAWANE\ZSL829_CONDOR_PHQ525_6.0_PHQ525_AR_V19.0_20161111_PHQ525\

Done!

FIRMWARE DOWNLOAD LINK:

FOR CM2SPD PHQ525 FOR CM2

FOR SPD FLADHTOOL mege protected PHQ525 FOR SPD FLASHTOOL LINK 2
or media fire + pass PHQ525 FOR FLASHTOOL TESTED LINK 1
pass: PASSWORD

FLASHTOOL LATEST: FLASHTOOL

warning: if you are an amateur don't ask for my help.

FELLOW VIDEO INSTRUCTION:
same steps as lenovo a1000

GUIDE TO FLASH WITH RESEARCH DOWNLOADER

1- Open the Research download tool
2. Launch ResearchDownload.exe

3- Click on the Load Packet icon (top left corner)

4- A window will pops up, navigate to the location of the .pac file, select it then click Open

5- The pac file should now be loaded (its name should appear at the top)

6- Click the Settings Icon (top left corner)

7- In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files

8- Click the Start downloading button

9-You should see Waiting.... under the Progress bar

10. Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume down and volume up buttons while connecting to PC on some phones) and flashing should begin. DO NOT interrupt