Flash Samsung Galaxy Tab 4 7.0 (3G) SM-T231 KITKAT 4.4.2 Tested Firmware

Samsung Galaxy Tab 4 7.0 (3G) SM-T231

Mobile : Galaxy Tab 4 7.0 (3G)
Model : SM-T231
System Version : KitKat 4.4.2
Baseband : KSA T231XXU0AOI2

download link:

Galaxy Tab 4 7.0 (3G) SM-T231 KITKAT 4.4.2

download odin flasher:

ODIN FLASHER

guide to flash:

How to update Galaxy TAB 4 7.0 

 SM-T231 (3G) to Android 4.4.2 

Step 1: Download the Odin software and Android 4.4.2 firmware, from the downloads section above.

Step 2: Extract Android 4.4.2 firmware file.

Step 3: Extract Odin file.

Step 4: Switch off your Galaxy Tab 4 from PC, boot it into download mode. To achieve this, wait for six to seven seconds after screen goes off, and long press Volume Down + Power + Home buttons until warning screen is displayed. Then press, Volume Up to proceed to download mode.

Step 5: Interface your tablet to PC using USB cable. In Odin you should see an "Added" message appearing in the Log box at the bottom left, and the first box under ID:COM will also change its background colour to Blue.

Step 6: Load firmware into Odin. To achieve this, Click on the AP button on Odin and the select the .tar.md5 extracted file as explained in Step 3.

Step 7: Within Odin, check to ensure that Re-partition checkbox is deselected,

Step 8: Within Odin, select Start Button to start flashing the firmware on your tablet.

Step 9: After completion of installation, your Galaxy Tab 4 will reboot automatically. You'll get a "Pass" message upon successful installation from Odin.

Step 10: Disconnect your tablet from the computer. Navigate to Settings > About Device to verify installation of new firmware.