Guide To Flash Oppo JOY3 A11W MT6582 Android 4.4.2 By mtk fashtool tested firmware

OPPO JOY3 A11W MT6580 ANDROID 4.4.2
TESTED FIRMWARE

FREE DOWNLOAD

INFO

Brand : OPPO
ProdName : A11w
ProdModel : A11w
Device : A11w
AndroidVer: 4.4.2
MTKxCPU : MT6582
MTKxPRJ : A11wEX_11_A.07_151214

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM213
[eMMC] : FLASH_CID : 150100463331324D4206DBC3D357136D
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 78A2D16722127048F80EF545B582D5FF
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1

CPU: MT6582 SW:0001 Ver: CA01
Downloading Boot8 ...
EMMC Size: 0x03A3E00000
Flash Type: EMMC
INT/EXT RAM Size: 0x0+0x0
Reading infr(EMMC)...
model:A11w
brand:OPPO
id:A11wEX_11_151214
version:4.4.2
model:A11w
brand:OPPO
manufacturer:OPPO
PRELOADER BaseAddr:0x0 Size:0x1400000
MBR BaseAddr:0x1400000 Size:0x80000
EBR1 BaseAddr:0x1480000 Size:0x80000
PRO_INFO BaseAddr:0x1500000 Size:0x300000
NVRAM BaseAddr:0x1800000 Size:0x500000
PROTECT_F BaseAddr:0x1D00000 Size:0xA00000
PROTECT_S BaseAddr:0x2700000 Size:0xA00000
SECCFG BaseAddr:0x3100000 Size:0x20000
UBOOT BaseAddr:0x3120000 Size:0x60000
BOOTIMG BaseAddr:0x3180000 Size:0x1000000
RECOVERY BaseAddr:0x4180000 Size:0x1000000
SEC_RO BaseAddr:0x5180000 Size:0x600000
MISC BaseAddr:0x5780000 Size:0x80000
LOGO BaseAddr:0x5800000 Size:0x300000
EBR2 BaseAddr:0x5B00000 Size:0x80000
OPPO_CUSTOM BaseAddr:0x5B80000 Size:0x100000
RESERVE1 BaseAddr:0x5C80000 Size:0x1000000
RESERVE2 BaseAddr:0x6C80000 Size:0x2000000
EXPDB BaseAddr:0x8C80000 Size:0xA00000
ANDROID BaseAddr:0x9680000 Size:0x60000000
CACHE BaseAddr:0x69680000 Size:0x7E00000
USRDATA BaseAddr:0x71480000 Size:0x332080000
BMTPOOL BaseAddr:0xFFFF0000 Size:0x1500000
>>Done.

REMARQUE:

MAKE BACKUP BEFORE FLASH

DOWNLOAD LINK:

Oppo JOY3 A11W MT6582 Android 4.4.2

FLASHTOOL DOWNLOAD LINK:

FLASHTOOL

How To Flash Via SP FLASHTOOL?

1-Requirements:

- A Computer PC Run Windows XP or above
- Usb data cable (not a generic cable)
- Mtk usb drivers installed manually, you will find instruction bellow
- Your Mtk Smartphone Face a soft issue
- Original stock rom (you can find it above in download section)
- The latest SP Flashtool version
2-How to install VCOM Drivers:
- Open device manager from my PC or my computer.
- Click on any item and go to actions > Add legacy hardware
- Now, press next and select install drivers manually
- Press next and click on have disk
- from the browse option, select VCOM drivers From mtk drivers folder
- Once its done. You will see a screen similar to this:
- Once you are done with the driver installation, go to device manager > Ports (COM&LPT) you will find a device similar to this:
3-How to flash rom using SP Flashtool?:
- Power the phone off, remove the battery from the smartphone and put it back without booting the phone (if the battery is inside then simply switch it off).
- Launch SP Flashtool
*Double clicks onFlash_tool.exe
*Press OK
- Click on scatter-loading option and browse to the scatter file of your stock rom choose MTxxxx_android.txt (scatter.txt).
- Dont touch any options, Keep the original setting (In case you want to format device before flash press choose format+download but it'snt recommanded because you will be ended with an EMEI null)
- If you phone is alive and has a software issue (contain virus, Stuck on logo, apps setting problem, blink, or not work as expected) I advise you to Uncheck Preloader as a precaution. On contarary check all pertitions if you have a boot problem (you phone does'nt boot when you try to power on it).
- Once you are done with everything, click on the download button at the top of the software.
Stop should now be prominent while other options should be grayed out
- Connect your switched off phone with battery inside to PC via Usb cable
- A progressbar should start running
- In the end of an success flash process, a box should show up with green OK symbol inside
- Disconnect the phone, remove the battery, slot it back in then power the phone.