How to use WiseLink Tool [Download Link]

WiseLink Tool is one of a great Alternative to Sp flashtools wich can bypass most of errors you got when flashing with sp flashtools and other tools.

 This tool flashes MTK chipset based device

firmwares.

Installation:

- Extract the compressed archive.

- Run the WiseLinkTool_v5.8.0.56.exe setup file (Recommended to run it as Administrator on Windows 7 and above)

- Run the installed software

- Tick the "No Register Login" in the opening dialog.

- The software is ready to use.

How To Use:

- Load the scatter.txt

- Hit the "Download" button to start flashing the firmware.

- Connect your turned off device.

- Flashing now starts.

- Green circle apperars, the flashing succesfully done.

Requirement

>> Download WiseLink Tool V 4.1 HERE or V 5.8 HERE

>> Install VCOM drivers ( http://www.//2014/11/how-to-install-vcom-driver-for-mtk.html)

>> PC

>> USB Cord

>> Phone to be flashed

>> Firmware (it's usually in the format shown in the image below)

Picture guild:

>>Install WiseLink Tool on your PC

>> Run WiseLink Tool as Administrator

>> In the Login box, click Open RegCode File

>> Navigate to the location of the ZZZZZZZ.key file, select it and click Open

>>Click OK

>> You should now see the WiseLink Tool dashboard

>>Click the Scatter-loading File button

>>In the window that pops up, navigate to the firmware's folder and select the scatter file (its a .sca file)

>> A list with ticked boxes should now appear in WiseLink Tool

>> Click Download

>> Connect the phone to the PC (while switched off with battery inside) and wait for flashing to be complete before disconnecting