MT6572__alps__SM-J5008__mtk6589_wet_jb3__5.1.1__ALPS.JB3.MP.V1.8

SAMSUNG GALAXY J5 SM-J5008 MT6572 CLONE FIRMWARE

INFO:

Wait for phone...

Phone found! [ 13 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6572

BB_CPU_NME : [MediaTek] MT6572_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with SPRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x88

NAND Flash : NOT INSTALLED

eMMC Flash : 110100303034473930109D21CCC670C7

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x11 , OEM : 0100

[eMMC] : FLASH_INF : [TOSHIBA] , 09G40

[eMMC] : FLASH_CID : 110100303034473930109D21CCC670C7

[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000

[eMMC] : FLASH_LEN : 0x00000000EC000000

[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]

DEV RID : 0x6211332FF4B369D279664E32DDFC8BCE

INT RAM : 0x00020000

EXT RAM : 0x20000000 [512 MiB]

BOOT TYPE : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ... 

Brand : alps

ProdName : mtk6589_wet_jb3

ProdModel : SM-J5008

Device : mtk6589_wet_jb3

AndroidVer: 5.1.1

MTKxCPU : MT6572

MTKxPRJ : ALPS.JB3.MP.V1.8

[Read Ok] : preloader_benrui72_wet_jb3.bin

[Read Ok] : MBR

[Read Ok] : EBR1

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / benrui72_wet_jb3 / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 645 MiB

How To Flash:

• Its a Scatter file you can flash it with SP Flash Tool or any Flasher Box 
• Select “scatter-Loading” and Slect MT6572_Android_scatter.txt in folder
• Wait file to be added into Flash Tool Or Any Flashing box
• Select “Download Only” or if upgrade “Firmware upgrade” in Flash Tool
• Turn off your phone
• Press “Download” Button to start
• And connect your phone with PC via USB data cable.
• The process will start and a red progress bar will appear after color purple, yellow.
• And green circles display
• Finish !
• You can now safely disconnect your phone and turn it on.
• its Done..!
• 
  

REMARQUE:

MAKE BACKUP BEFORE FLASH

DOWNLOAD LINK:

MT6572__alps__SM-J5008__mtk6589_wet_jb3__5.1.1__ALPS.JB3.MP.V1.8