CONDOR PLUME P7 PGN514 MT6735 TESTED FIRMWARES
PLUME P7 PLUS VERSION T5915
Brand : condor
ProdName : PGN523
ProdModel : PGN523
Device : PGN523
AndroidVer: 6.0
MTKxCPU : MT6735
MTKxPRJ : GBL7360AC_0302_T5915
FLASHTOOL DOWNLOAD LINK:
PLUME P7 PLUS VERSION T6099
Brand : condor
ProdName : PGN523
ProdModel : PGN523
Device : PGN523
AndroidVer: 6.0
MTKxCPU : MT6735
MTKxPRJ : GBL7360AC_0302_T6099
FIRMWARE DOWNLOAD LINK:
FLASHTOOL DOWNLOAD LINK:
HERE
How To Flash Via SP FLASHTOOL?
- A Computer PC Run Windows XP or above
- Usb data cable (not a generic cable)
- Mtk usb drivers installed manually, you will find instruction bellow
- Your Mtk Smartphone Face a soft issue
- Original stock rom (you can find it above in download section)
- The latest SP Flashtool version
2-How to install VCOM Drivers:- Open device manager from my PC or my computer.
- Click on any item and go to actions > Add legacy hardware
- Now, press next and select install drivers manually
- Press next and click on have disk
- from the browse option, select VCOM drivers From mtk drivers folder
- Once its done. You will see a screen similar to this:
- Once you are done with the driver installation, go to device manager > Ports (COM&LPT) you will find a device similar to this:
3-How to flash rom using SP Flashtool?:- Power the phone off, remove the battery from the smartphone and put it back without booting the phone (if the battery is inside then simply switch it off).
- Launch SP Flashtool
*Double clicks onFlash_tool.exe
*Press OK
- Click on scatter-loading option and browse to the scatter file of your stock rom choose MTxxxx_android.txt (scatter.txt).
- Dont touch any options, Keep the original setting (In case you want to format device before flash press choose format+download but it'snt recommanded because you will be ended with an EMEI null)
- If you phone is alive and has a software issue (contain virus, Stuck on logo, apps setting problem, blink, or not work as expected) I advise you to Uncheck Preloader as a precaution. On contarary check all pertitions if you have a boot problem (you phone does'nt boot when you try to power on it).
- Once you are done with everything, click on the download button at the top of the software.
Stop should now be prominent while other options should be grayed out- Connect your switched off phone with battery inside to PC via Usb cable
- A progressbar should start running
- In the end of an success flash process, a box should show up with green OK symbol inside
- Disconnect the phone, remove the battery, slot it back in then power the phone.
ENJOY.
0 comments:
Post a Comment