CONDOR PLUME G4 PLUS PGN521 MT6580 TESTED FIRMWARES
PLUME G4 PLUS T5492
Device Brand : condor
Device Model : PGN521
Device CPU : MT6580
Device IntName : PGN521
Device Version : 5.1
Device Compile : 25/04/2016 05:35:51
Device Project : WBW5617AC_0201_T5492
Device ExtInfo : PGN521
Device Model : PGN521
Device CPU : MT6580
Device IntName : PGN521
Device Version : 5.1
Device Compile : 25/04/2016 05:35:51
Device Project : WBW5617AC_0201_T5492
Device ExtInfo : PGN521
PLUME G4 PLUS T5572
Brand : condor
ProdName : PGN521
ProdModel : PGN521
Device : PGN521
AndroidVer: 5.1
MTKxCPU : MT6580
MTKxPRJ : WBW5617AC_0201_T5572
FIRMWARE DOWNLOAD LINK:
FLASHTOOL DOWNLOAD LINK:
How To Flash Via SP FLASHTOOL?
- A Computer PC Run Windows XP or above
- Usb data cable (not a generic cable)
- Mtk usb drivers installed manually, you will find instruction bellow
- Your Mtk Smartphone Face a soft issue
- Original stock rom (you can find it above in download section)
- The latest SP Flashtool version
2-How to install VCOM Drivers:- Open device manager from my PC or my computer.
- Click on any item and go to actions > Add legacy hardware
- Now, press next and select install drivers manually
- Press next and click on have disk
- from the browse option, select VCOM drivers From mtk drivers folder
- Once its done. You will see a screen similar to this:
- Once you are done with the driver installation, go to device manager > Ports (COM&LPT) you will find a device similar to this:
3-How to flash rom using SP Flashtool?:- Power the phone off, remove the battery from the smartphone and put it back without booting the phone (if the battery is inside then simply switch it off).
- Launch SP Flashtool
*Double clicks onFlash_tool.exe
*Press OK
- Click on scatter-loading option and browse to the scatter file of your stock rom choose MTxxxx_android.txt (scatter.txt).
- Dont touch any options, Keep the original setting (In case you want to format device before flash press choose format+download but it'snt recommanded because you will be ended with an EMEI null)
- If you phone is alive and has a software issue (contain virus, Stuck on logo, apps setting problem, blink, or not work as expected) I advise you to Uncheck Preloader as a precaution. On contarary check all pertitions if you have a boot problem (you phone does'nt boot when you try to power on it).
- Once you are done with everything, click on the download button at the top of the software.
Stop should now be prominent while other options should be grayed out- Connect your switched off phone with battery inside to PC via Usb cable
- A progressbar should start running
- In the end of an success flash process, a box should show up with green OK symbol inside
- Disconnect the phone, remove the battery, slot it back in then power the phone.
ENJOY.
0 comments:
Post a Comment